Vintage Stereo Set

Delivery Time: 5-10 Days

Looking for vintage 70’s HiFi sound? Here it is!!

Together with a HiFi consultant we have put together a truly vintage stereo combination. All pieces have been fully renovated, cleaned & checked leaving a perfect system for the HiFi lover!

Starting with a SONY STR-7025 Hi-Fi VINTAGE Receiver Integrated amplifier straight from the golden era of HiFi.

Combined with a Pioneer PL-11 dark wood vintage turntable

& last but not least a pair of top vintage 1975 Tandberg TL 1520 Speakers from Norway

SOLD
Categories: , Tags: , ,
 

Description

Looking for vintage 70’s HiFi sound? Here it is!!

Together with a HiFi consultant we have put together a truly vintage stereo combination. All pieces have been fully renovated, cleaned & checked leaving a perfect system for the HiFi lover!

Starting with a SONY STR-7025 Hi-Fi VINTAGE Receiver Integrated amplifier Phono MM record input straight from the golden era of HiFi.

Combined with a Pioneer PL-11 dark wood vintage turntable

& last but not least a pair of top vintage 1975 Tandberg TL 5020 Speakers from Norway

Specifications Sony STR-7025

Tuning range: FM, AM

Power output: 18 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 25kHz

Total harmonic distortion: 0.8%

Damping factor: 25

Input sensitivity: 2mV (mic), 2.5mV (MM), 250mV (line)

Signal to noise ratio: 60dB (mic), 60dB (MM), 80dB (line)

Output: 250mV (line), 30mV (DIN)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 2 x IC, 3 x FET, 31 x transistors, 21 x diodes

Dimensions: 427 x 149 x 345mm

Weight: 8.5kg

Features include MM phono stage, tuner, AUX, two Tape inputs/outputs (RCA & DIN), back lit signal strength meter, two sets of speaker outputs (switchable on front), loudness, bass, treble, stereo mono switch, Hi-filter, headphone socket, stereo microphone inputs & balance.

FM/AM tuner with signal meter, capacitor input, screw down terminals for FM (300ohms) & AM.

It’s in excellent working order no noisy switches etc

Specifications Pioneer PL-11

Specifications
Drive method: idler wheel (Ilder)
Plate: 300mm, 1Kg of die-cast aluminum alloy.
Motor: 4-pole synchronous
Speeds: 33 and 45 rpm
Fluctuation and tremolo: 0.12%
Signal to noise ratio: 40dB
Arm: type static balance, tube arm, the counterweight can be locked, it does not have numbers to calibrate so in case of changing the capsule a scale will be necessary.
Capsule: Shure M75ED with needle in good condition.
Dimensions: 420 x 333 x 162mm
Weight: 7kg

Specifications Tandberg TL-1520

Made in Norway.
Dimensions:
Weight:
System:
Impedance: 8 ohms.
Power: 100 – 200 watts.
Output: 96 dB.

Additional information

Weight 20 kg